PERSONAL GAS DETECTION

Accurately detects O₂, CO, NO₂, SO₂ and H₂S, and is the only 1-4 gas monitor you need in industrial and refinery applications. The X-am 2500 combines reliable sensor technology with long battery life and intuitive operation in an instrument that defines safety. It is approved for markets including mining, oil & gas, chemical, fire and hazardous response, government and many other applications.

Clearance measurement was never this easy and convenient. The Dräger Xam 8000 portable gas detector detects up to 7 toxic and flammable gases as well as vapours and oxygen all at once-either in pump or diffusion mode. Innovative signalling design and handy assistant functions ensure complete safety throughout the process. The gas detector features inductive charging. This makes it easier to operate and increases the lifespan of the device.

Automatic bump tests, calibration, reduced test gas consumption, short testing times. Testing is as simple as inserting your Dräger gas detectors and closing the lid. X-dock immediately detects all sensor combinations and automatically tests and adjust when all of the required test gases are connected. All data is documented in the database. With the report wizard tool, you can create customized reports and calibration certificates.

The Dräger Pac 8500 single gas detector provides precise measures even under the most adverse conditions. Detector can be equipped with a hydrogen compensated CO sensor or a Dräger dual sensor. The dual sensors provide the option of measuring two gases at once: H2S with CO, O₂ with CO, or H₂S with O₂. 

The Dräger Pac 6000 disposable single gas detector measures CO, H₂S, SO₂, or O₂ reliably and precisely even in the most adverse conditions. The Pac 6000 is protected against water, dust and other foreign bodies by a special membrane filter. The robust design, quick sensor response times, and a powerful battery ensure maximum safety for up to two years with virtually no maintenance required.

In combination with the Dräger X-am 5000, 5100, or 5600 gas detection instruments, the X-zone 5500 can be used for measurement of up to six gases and extends the range of your portable gas detection technology exponentially.

The Dräger short-term detector tubes have proven to be a very cost-effective and reliable way to measure toxic gases and vapours in the workplace.  Spot measurement for more than 500 different gases., utilizing more than 200 different Dräger -Tubes. Short measurement time between 5 second and 15 minutes.   Employed manually together with the Dräger accuro gas detection pump or automatically together with the pump accuro 2000 or the compact microprocessor-controlled Quantimeter 1000.

The Dräger Polytron 8310 IR is an advanced explosion-proof transmitter for the detection of combustible hydrocarbon gases in the lower explosion limit (%LEL). It uses the Dräger PIR 3000 single beam, heated Infrared sensor that can be configured for methane, propane, or ethylene. Backlit display, status LED’s and a 3 wire 4-20 mA analog output with HART™ protocol. Optional relay contacts (High, low & Fault) are available. Configuration & calibration are performed using a non-intrusive magnetic wand through the transmitter window or via HART™.  Other models are available with Modbus and Fieldbus protocol.