FIXED GAS DETECTORS AND FLAMMABLE GAS DETECTORS

The Dräger Polytron 5100 EC is Dräger’s cost effective fixed gas detector. It uses the high-performance plug and play, long life electrochemical DrägerSensor™ to detect toxic gases and O².

Backlit display (3 wire only), status LED’s, and a 2 or 3 wire 4-20 mA analog output. Optional relay contacts (High, Low & Fault) are available. Configuration & calibration are performed using a non-intrusive magnetic wand through the transmitter window.

The Dräger Polytron 5200 CAT is a flame detector that detects flammable gases in the lower explosion limit (%LEL). It uses Dräger double compensating catalytic bead sensor which provides superior performance over conventional catalytic bead sensors.

Backlit display (3 wire only), status LED’s, and a 2 or 3 wire 4-20 mA analog output. Optional relay contacts (High, Low & Fault) are available.  Configuration & calibration are performed using a non-intrusive magnetic wand through the transmitter window.

The Dräger Polytron 5310 IR is an IR flame detector that detects flammable gases in the lower explosion limit (% LEL). It uses the Dräger PIR 3000 single beam, heated Infrared sensor that can be configured for methane, propane, or ethylene.

Backlit display (3 wire only), status LED’s, and a 2 or 3 wire 4-20 mA analog output. Optional relay contacts (High, Low & Fault) are available.

The Dräger Polytron 5700 IR is an IR flame detector that detects flammable gases in the lower explosion limit %(LEL). It uses the high performance Dräger PIR 7000 dual beam, double compensating, heated infrared sensor which provides industry leading long-term performance specifications.

Backlit display (3 wire only), status LED’s, and a 2 or 3 wire 4-20 mA analog output. Optional relay contacts (High, Low & Fault) are available. Configuration & calibration are performed using a non-intrusive magnetic wand through the transmitter window. A built-in library allows automatic cross calibration for various flammable gases.    

The Dräger Polytron 5720 IR is an IR flame detector that detects CO² in percent volume or ppm. It uses the high performance Dräger PIR 7020 dual beam, double compensating, heated infrared sensor which provides industry leading long-term performance specifications.

Backlit display (3 wire only), status LED’s, and a 2 or 3 wire 4-20 mA analog output. Optional relay contacts (High, Low & Fault) are available.  Configuration & calibration are performed using a non-intrusive magnetic wand through the transmitter window.

The Polytron 8100 EC is Dräger’s top of line electrochemical detector. It uses the high-performance plug and play, long life electrochemical DrägerSensor™ to precisely detect toxic gases or O². Backlit display (3 wire only), status LED’s, and a 2 or 3 wire 4-20 mA analog output. Optional relay contacts (High, Low & Fault) are available.  Configuration & calibration are performed using a non-intrusive magnetic wand through the transmitter window.

Optionally, Dräger Dongles can add additional capabilities including predictive maintenance and data logging. Other models are available with Modbus and Fieldbus protocols.

The Dräger Polytron 8200 CAT is an advanced flammable gas detector that detects hazardous substances in the lower explosion limit (%LEL). It uses the Dräger double compensating catalytic bead sensor which provides superior performance over conventional catalytic bead sensors.

Backlit display (3 wire only), status LED’s, and a 2 or 3 wire 4-20 mA analog output. Optional relay contacts (High, Low & Fault) are available.  Configuration & calibration are performed using a non-intrusive magnetic wand through the transmitter window, or via HART™. Other models are available with Modbus and Fieldbus protocols.

The Dräger Polytron 8310 IR is an IR flame detector that detects hydrocarbon gases in the lower explosion limit (%LEL). It uses the Dräger PIR 3000 single beam, heated Infrared sensor that can be configured for methane, propane, or ethylene.

Backlit display, status LED’s and a 3 wire 4-20 mA analog output with HART™ protocol. Optional relay contacts (High, low & Fault) are available. Configuration & calibration are performed using a non-intrusive magnetic wand through the transmitter window or via HART™. Other models are available with Modbus and Fieldbus protocol.

The Dräger Polytron 8700 IR is an IR flame detector that uses the high performance Dräger PIR 7000 dual beam, double compensating, heated infrared sensor to provide industry leading long-term performance specifications.

Backlit display, status LED’s and a 3 wire 4-20 mA analog output with HART™ protocol. Optional relay contacts (High, low & Fault) are available. Configuration & calibration are performed using a non-intrusive magnetic wand through the transmitter window or via HART™. A built-in library allows automatic cross calibration for various combustible gases. Other models are available with Modbus and Fieldbus protocols.

The Dräger Polytron 8720 IR is an IR flame detector that detects CO₂ in percent volume or ppm. It uses the high performance Dräger PIR 7020 dual beam, double compensating, heated infrared sensor which provides industry leading long-term performance.

Backlit display, status LED’s and a 3 wire 4-20 mA analog output with HART™ protocol. Optional relays contacts (High, low & Fault) are available.  Configuration & calibration are performed using a non-intrusive magnetic wand through the transmitter window or via HART™. Other models are available with Modbus and Fieldbus protocols.

The Dräger PointGard 2100 series is a general-purpose area "Stand Alone" gas detection system. With the long life electrochemical DrägerSensor™, the PointGard 2100 accurately monitors toxic gases and O². Its rugged, water resistant housing comes complete with backlit display, horn, strobes, 4-20 mA output, relays and a built-in power supply.

The Dräger Pulsar 7000 series is a stationary open path flammable gas detector for the measurement of explosive hydrocarbons gases. The standard unit comes with a 4-20 mA analog output with HART™ protocol. A HART™ hand held terminal (HHT) or laptop is all that is required to align and set up the Pulsar 7000. The robust design and the extremely rapid response of the sensor make the Dräger Pulsar 7000 Series a dependable solution for your requirements in the oil and gas industry, as well as the chemical industry.

The Dräger Flame 3000 flame detector uses a visual/Infrared measurement principle to detect flames. This fixed gas detector reduces false alarms or loss of sensitivity that can occur with conventional UV/IR & IR3 technologies. 4-20 mA analog output or relays. 

The Dräger Flame 5000 flame detector uses a visual/Infrared measurement principle to detect flames. This fixed gas detector reduces false alarms or loss of sensitivity that can occur with conventional UV/IR & IR3 technologies. 4-20 mA analog output with HART™ protocol or relays. The Flame 5000 also includes a built-in color video signal that is transmitted a over twisted pair. This can reduce costs by customers not requiring additional CCTV cameras to monitor an area. In addition, video of any fire events is logged on the on board datalogger.